SUPERVISORY INTERDISCIPLINARY GENERAL ENGINEER/ARCHITECT (PMEB) with Security Clearance
Dutieso You will provide senior leadership related to Project Management, Design Management, and Construction Management.o You will lead the design staff in performing project management roles for the project (scope, cost, and schedule) from preliminary design authorization to project closeout.o You will forecast workload and resourcing requirements based on future requirements and historical information.o You will evaluate project schedules against existing workload.o You will provide professional engineering and technical advice for facility engineering.o You will review plans and designs to ensure they conform with NAVY and DoD guidance.o You will serve as the engineering specialist providing technical expertise to the work site.o You will identify developmental and training needs of technical staffRequirements Conditions of Employmento Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.o Supervisors in the executive branch have a heightened personal responsibility for advancing government ethicsYou will be required to review the 14 General Principles of Ethical Conduct at 5 CFR 2635.101.o Must be a US Citizen.o Must be determined suitable for federal employment.o Must participate in the direct deposit pay program.o Generally, current federal employees applying for GS jobs must serve at least one year at the next lower grade levelThis requirement is called time-in-gradeTime-in-grade requirements must be met by the closing date of this announcement.o You will be required to obtain and maintain a current valid United States driver's license.o You will be required to obtain and maintain an interim and/or final secret security clearance prior to entrance on dutyFailure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.o This position is covered under the Defense Acquisition Workforce Improvement Act (DAWIA)Certification in the Acquisition Functional Area and category assigned to the position is required within established category timeframes.o You may be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes when making site visits, as determined by site conditions and applicable safety regulations.o This position requires current registration as a Professional Engineer (PE) or Architect (RA) in any state, District of Columbia, Guam or Puerto Rico.o This position may require overtimeOvertime may be required, but not guaranteed on a regular basis.o This position may require occasional travel from normal duty stationYou must be able to travel on military and commercial aircraft.o You will be required to complete ethics orientation within three months of appointment and submit a Confidential Financial Disclosure Report, OGE-450, within 30 days of appointmentQualifications This position has a Selective Placement Factor (SPF) which is CURRENT registration as a Professional Engineer (PE) or Architect (RA) in any state, District of Columbia, Guam or Puerto RicoIf you meet this requirement, you MUST provide a copy of your current registration with your applicationNote - a copy of a wall certificate, without an expiration date, will not serve to verify this requirementIn addition to the SPF and Basic Requirements for this position, your resume must also demonstrate at least one year of specialized experience at or equivalent to the GS-13 grade level or pay band in the Federal service or equivalent experience in the private or public sector performing duties such as:
1) Supervising and/or leading a team of engineers, architects, and technicians in performing the full range of multidisciplinary engineering responsibilities; 2) Overseeing engineering and architectural processes throughout the design, construction, acceptance, and project close-out stages; 3) Providing technical engineering support to subordinates and staff; and 4) Resolving engineering design problems to ensure mission accomplishmentAdditional qualification information can be found from the following Office of Personnel Management website:
https:
//www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=GS-PROF https:
//www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/files/all-professional-engineering-positions-0800.pdf https:
//www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/architecture-series-0808/ Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social)Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employmentEducation Applicants for the Professional Engineering Series must meet the following basic education requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual:
Successful completion of a professional engineering degreeTo be acceptable, the program must:
(1) lead to a bachelor's degree (or higher) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics:
(a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronicsSuch education must demonstrate the knowledge, skills, and abilities necessary to do the work of the positionOR Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto RicoAbsent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration For more information about EI and EIT registration requirements, please visit the National Society of Professional Engineers website at:
http:
//www.nspe.org OR Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico The FE examination is not administered by the USOffice of Personnel ManagementFor more information, please visit:
http:
//www.nspe.org/Licensure/HowtoGetLicensed/index.htmlOR Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements aboveThe courses must be fully acceptable toward meeting the requirements of an engineering program as described aboveOR Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least one year of professional engineering experience acquired under professional engineering supervision and guidanceOrdinarily, there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positionsApplicants for the Professional Architecture Series must meet the following basic education requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual:
Successful completion of a bachelor's or higher degree in architectureOR Successful completion of a bachelor's or higher degree in a field related to architecture that included 60 semester hours of course work in architecture or related disciplines of which at least (1) 30 semester hours were in architectural design, and (2) 6 semester hours were in each of the following:
structural technology, properties of materials and methods of construction, and environmental control systemsOR Have a combination of college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the arts and sciences underlying professional architecture, and (2) a good understanding, both theoretical and practical, of the architectural principles, methods, and techniques and their applications to the design and construction or improvement of buildingsThe curriculum for a degree is in either architecture or architectural engineering and covers function, esthetics, site, structure, economics, mechanical-electrical, and other engineering problems related to the design and construction of buildings primarily (but not exclusively) intended to house human activities OR you lack a degree in architecture, but have 1 year of experience in an architect's office or in architectural work for each year short of graduation from a program of study in architecture that demonstrates that you have acquired a thoroug Recommended Skills Construction Construction Management Design Management Economy Electronics Engineering Physics Apply to this job. Think you're the perfect candidate? Apply on company site $(document).ready( function() $(#ads-desktop-placeholder).html(
n
n
n Estimated Salary: $20 to $28 per hour based on qualifications.
1) Supervising and/or leading a team of engineers, architects, and technicians in performing the full range of multidisciplinary engineering responsibilities; 2) Overseeing engineering and architectural processes throughout the design, construction, acceptance, and project close-out stages; 3) Providing technical engineering support to subordinates and staff; and 4) Resolving engineering design problems to ensure mission accomplishmentAdditional qualification information can be found from the following Office of Personnel Management website:
https:
//www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=GS-PROF https:
//www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/files/all-professional-engineering-positions-0800.pdf https:
//www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/architecture-series-0808/ Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social)Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employmentEducation Applicants for the Professional Engineering Series must meet the following basic education requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual:
Successful completion of a professional engineering degreeTo be acceptable, the program must:
(1) lead to a bachelor's degree (or higher) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics:
(a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronicsSuch education must demonstrate the knowledge, skills, and abilities necessary to do the work of the positionOR Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto RicoAbsent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration For more information about EI and EIT registration requirements, please visit the National Society of Professional Engineers website at:
http:
//www.nspe.org OR Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico The FE examination is not administered by the USOffice of Personnel ManagementFor more information, please visit:
http:
//www.nspe.org/Licensure/HowtoGetLicensed/index.htmlOR Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements aboveThe courses must be fully acceptable toward meeting the requirements of an engineering program as described aboveOR Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least one year of professional engineering experience acquired under professional engineering supervision and guidanceOrdinarily, there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positionsApplicants for the Professional Architecture Series must meet the following basic education requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual:
Successful completion of a bachelor's or higher degree in architectureOR Successful completion of a bachelor's or higher degree in a field related to architecture that included 60 semester hours of course work in architecture or related disciplines of which at least (1) 30 semester hours were in architectural design, and (2) 6 semester hours were in each of the following:
structural technology, properties of materials and methods of construction, and environmental control systemsOR Have a combination of college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the arts and sciences underlying professional architecture, and (2) a good understanding, both theoretical and practical, of the architectural principles, methods, and techniques and their applications to the design and construction or improvement of buildingsThe curriculum for a degree is in either architecture or architectural engineering and covers function, esthetics, site, structure, economics, mechanical-electrical, and other engineering problems related to the design and construction of buildings primarily (but not exclusively) intended to house human activities OR you lack a degree in architecture, but have 1 year of experience in an architect's office or in architectural work for each year short of graduation from a program of study in architecture that demonstrates that you have acquired a thoroug Recommended Skills Construction Construction Management Design Management Economy Electronics Engineering Physics Apply to this job. Think you're the perfect candidate? Apply on company site $(document).ready( function() $(#ads-desktop-placeholder).html(
n
n
n Estimated Salary: $20 to $28 per hour based on qualifications.
|
|
 | |
